Ventilation with heat recovery

 Contrary to the usual practice of building renovation, RENESCO pays particular attention to providing comfortable indoor microclimate.

 

The ventilation unit is particularly suitable for apartment buildings:

  • The ventilation system provides 20 to 30 m3/h of fresh air for each room. According to standards and regulations it corresponds to required fresh air volume per 1-2 people.
  • Exhaust air is extracted from the  sanitary arrangements (WC and a bathroom) and, if it is possible, kitchens through existing ventilation shafts, which are combined in the attics.
  • The extracted air from building is used to heat supplied air with heat recovery efficiency 84%.
  • The ventilation equipment is certified and meet the requirements of the  Passive house standard;. 
  • Mechanical ventilation systems with air-handling units are placed in the building attics. 
  • It’s activities cause air inlet and air exhaust noise in the range of 28-79 db(A).
  • Air handling units are equipped with counter flow plate heat exchangers (including the humidity or enthalpy recovery units) with high heat recovery coefficients.
  • Air moves through air duct systems, located on the facade of the building and incorporated into thermal insulation layers, to the attic and every room.

  

One-third of our renovated multifamily buildings are equipped with a mechanical ventilation system with heat recovery to organize indoor air exchange